PXPL-92-98

Working width	98" / 2489 mm
HP recommended	75 to 125 HP PTO
Cutting height	34" / 864 mm
Drum diameter	32" / 813 mm
Weight	2540 lbs / 1152 kg

Add to compare

Download the flyer

Options

CHOICE OF CHUTE

PSIG-7486

Semi-industrial chute with greasable hinges and access panel (removable)	PSIG-7486

Semi-industrial chute with greasable hinges and access panel (removable)

PSIG-7486

CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR

Hydraulic cylinder (included)	25TR08
Hose support for deflector cylinder	TSB-74104
Manual telescopic tube	T-74104

HYDRAULIC MOTOR FOR CHUTE ROTATION

Hydraulic motor (included)	MLH-315-R

Hydraulic motor (included)

MLH-315-R

HOSE KITS

PKB-PXPL-8698

Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder, the hydraulic system controlling the blade and the chute rotation motor. Installation not included.	PKB-PXPL-8698

Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder, the hydraulic system controlling the blade and the chute rotation motor. Installation not included.

PKB-PXPL-8698

SCRAPER BLADE

SIT1-98

T1-98

TV-98

SST-98

Semi-industrial scraper blade, carbon steel 450, reversible 1/2" x 4" not sharpened	SIT1-98
Industrial scraper blade, carbon steel 450, not reversible 1/2" x 6" sharpened	T1-98
	TV-98
Stainless Steel scraper blade, reversible, 1/2" x 4" not sharpened	SST-98

SKID SHOES

PHD-92104

PSHD-92104

PST-92104

Industrial skid shoes with Hardox 450 soles	PHD-92104
Skid shoes with ROCKTEC soles	PSHD-92104
Skid shoes with stainless steel soles	PST-92104

SPEED REDUCER

PRH-30M-2

PRH-25M-2

Speed reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c	PRH-30M-2
Drop box 1000/540 RPM. Two choices of input shafts : Reducer inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or reducer only 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c	PRH-25M-2

CHOICE OF POWER TAKE-OFF (PTO)

T80 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM)	9225
T80 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM)	9569
T80 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM)	9569-1
V80 Multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM)	9225-V
V80 Multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM)	9569-V
T90 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM)	9475
T90 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM)	9475-1
T90 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM)	9475-2
V90 Multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM)	9598
V90 Multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM)	9599
V90 Multilobe PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM)	9604

X-PRO BLADE OPTIONS

PXPLHD-98

PXPLTV-98

PXPLST-98

Carbon steel 450 scraper blade and skid shoes	PXPLHD-98
Tivar scraper blade and skid shoes for PXPL Snowblower	PXPLTV-98
Stainless Steel scraper blade and skid shoes for PXPL Snowblower	PXPLST-98

CHOICE OF COLORS

Red PRONOVOST
Blue	PX-02
Orange	PX-04
Yellow INDUSTRIAL	PX-06
Green	PX-07
Black	PX-10

Other recommended products

Additional Information

HYDRAULIC DRIVEN

It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

HYDRAULIC WHEELS

Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.

Practical to avoid blowing gravel.
Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

*Available only on a new snowblower made in production.

Complete specifications

HP recommended (min. - max.)	75 to 125 HP PTO
Working width	98" / 2489 mm
Working width with X-PRO blade	99 3/4" / 2534 mm
Cutting height	34" / 864 mm
Cutting height with X-PRO blade	8" / 203 mm
Hitch category	2 - 35" / 889 mm c/c
Impeller diameter	32" / 813 mm
Depth of drum	12" / 305 mm
Impeller housing contour : High quality steel	Included
Number of impeller blades	5
Impeller shaft diameter	2" / 51 mm
Height of impeller center	18 1/4" / 464 mm
Rotor RPM	540 RPM
Required RPM for the tractor PTO	540 RPM Opt. 1000 RPM
Number of augers	1
Main auger diameter	19 1/2" / 495 mm
Bearing / ductile iron housing	1 1/2" / 38 mm
Drive chain - Main auger	80
Number of shear bolts	1 for impeller + 1 for auger
Reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c	Opt.
Drive shaft included (optional)	T80 (T90)
Scraper blade - High quality steel	Included : 1/2" x 4" reversible, not sharpened
Scraper blade - Semi-industrial made of Hardox 450	Opt. : 1/2" / 4" reversible, not sharpened
Scraper blade - Industrial made of Hardox 450	Opt. : 1/2" x 6" not reversible, sharpened
Scraper blade - Tivar	Opt. 1" thickness, not reversible, not sharpened
Scraper blade - Stainless steel	Opt. : 1/2" x 4" reversible, not sharpened
Adjustable skid shoes - Quick adjustment high quality steel	Included
Adjustable skid shoes - Quick adjustment Hardox 450	Opt.
Adjustable skid shoes - Quick adjustment Rocktec	Opt.
Adjustable skid shoes - Quick adjustment stainless steel	Opt.
Blade and skid shoes on X-PRO blade - High quality steel	Included
Blade and skid shoes on X-PRO blade - Hardox 450	Opt.
Blade and skid shoes on X-PRO blade - Tivar	Opt.
Blade and skid shoes on X-PRO blade - Stainless steel	Opt.
Full flight main auger (industrial)	Opt.
Chute - Semi-industrial with greasable hinges and removable access panel	Opt.
Chute rotation system - Hydraulic motor kit (motor not included)	Included
Chute rotation maximum angle - Hydraulic motor rotation	335°
Antifriction for chute	Included : ring
Deflector - Manual	Opt.
Deflector - Hydraulic cylinder	Opt.
Color	Included : Red Pronovost Opt. Choice of 5 colors
Storage support	Included
Weight including chute	2540 lbs / 1152 kg