PGS-1020TRC

Working width	102" / 2591 mm
HP recommended	100 to 150 HP PTO
Cutting height	47 1/2" / 1207 mm
Approx. performance	1500 tons imp. / hour (tractor 150 HP)
Weight

Add to compare

Download the flyer

Options

CHOICE OF CHUTE

PSIG-92104

PCG-92104

PRP-92104-2

PRP-92104

PCT-92104

PCTC-INDR

Semi-industrial chute with greasable hinges and removable access panel, including hose support for deflector cylinder	PSIG-92104
Quick attach industrial chute with greasable hinges and removable access panel, including hose support for deflector cylinder. Kit of two unidirectional restrictors RSP-1/16x10 ORB included.	PCG-92104
24" Extension for industrial chute	PRP-92104-2
48" Extension for industrial chute	PRP-92104
Hydraulic telescopic industrial chute, a versatile chute for general use, including chute extension cylinders and hose support + hose support for deflector cylinder. Kit of two unidirectional restrictors RSP-1/16x10 ORB included.	PCT-92104
Mounting kit for working light on telescopic chute.	PKL-IND92104
Hydraulic telescopic industrial chute with rounded deflector designed for truck loading, greasable hinges and access panel, including 2 extension cylinders and hose support and 2 deflector cylinders and hose support. Kit of two unidirectional restrictors RSP-1/16x10 ORB included.	PCTC-INDR
Mounting kit for working light on telescopic chute.	PKL-INDR

CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR

Hydraulic cylinder (included)	25TR08
Hose support for deflector cylinder	TSB-74104

HYDRAULIC MOTOR FOR CHUTE ROTATION

Hydraulic motor (included)	MLH-315-R

Hydraulic motor (included)

MLH-315-R

HOSE KITS

PKB-GR3TRC

Kit for TRC models, also includes hoses for drum rotation motor. * Installation not included.	PKB-GR3TRC
Kit for TRC models with telescopic chute PCT-92104, also includes hoses for chute lifting cylinders. * Installation not included.	PKB-GR3TRC-T
Kit for TRC models with telescopic chute with round deflector PCTC-INDR, also includes hoses for chute lift cylinders and cylinder for round deflector adjustment. * Installation not included.	PKB-GR3TRC-TR

LATERAL BLADES

CL-1020PGS

Lateral blades, standard steel 3/8" x 5 1/2" x 78" with brace	CL-1020PGS

Lateral blades, standard steel 3/8" x 5 1/2" x 78" with brace

CL-1020PGS

SCRAPER BLADE

SIT1-102

T1-102

SST-102

Semi-industrial scraper blade, carbon steel 450, reversible 1/2" x 4" not sharpened	SIT1-102
Industrial scraper blade, carbon steel 450, reversible 1/2" x 4" not sharpened	T1-102
Stainless Steel scraper blade, reversible, 1/2" x 4" not sharpened	SST-102

SKID SHOES

PHD-PGS

PSHD-PGS

PST-PGS

Industrial skid shoes with Hardox 450 soles	PHD-PGS
Skid shoes with ROCKTEC soles	PSHD-PGS
Skid shoes with stainless steel soles	PST-PGS

SPEED REDUCER

PRH-30M-2

PRH-25M-2

PR3G200-2

Speed reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c	PRH-30M-2
Drop box 1000/540 RPM. Two choices of input shafts : Reducer inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or reducer only 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c	PRH-25M-2
Reducer 1000/555 (200 HP at 1000 RPM) 3 gears - 8" c/c	PR3G200-2

CHOICE OF POWER TAKE-OFF (PTO)

T90 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM)	9475
T90 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM)	9475-1
T90 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM)	9475-2
V90 Multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM)	9598
V90 Multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM)	9599
V90 Multilobe PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM)	9604

KIT OF 3 OR 4 DIVERTERS WITH JOYSTICK

Kit of 3 electric directionnal control valves to control 4 hydraulic functions (chute deflector, chute rotation, telescopic chute and TRC drum) including universal mounting bracket, hoses and fittings.	KVD-3IND
Kit of 4 electric directionnal control valves to control 5 hydraulic functions (chute deflector, chute rotation, telescopic chute, TRC drum and hydraulic lateral blades) including universal mounting bracket, hoses and fittings.	KVD-4IND
Kit of joystick controller 4 buttons with cables and connector. Installs on a hydraulic lever or tractor. Compatible for KVD-3IND + KVD-4IND.	KVD-IND-M4
Wiring harness and connector 20.	KVD-IND-H20

Other recommended products

Additional Information

HYDRAULIC DRIVEN

It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

HYDRAULIC WHEELS

Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.

Practical to avoid blowing gravel.
Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

*Available only on a new snowblower made in production.

Complete specifications

HP recommended (min. - max.)	100 to 150 HP PTO
Approximate performance	1500 tons imp. / hour (tractor 150 HP)
Working width	102" / 2591 mm
Cutting height	47 1/2" / 1207 mm
Hitch category	2 - 38 1/2" / 978 mm
Cutting height of lateral blades	Opt. CL : 66" / 1676 mm or 78" / 1981 mm
Height of chute base (TRC model)	49 1/2" / 1257 mm
Height with telescopic chute (TRC model)	PCT-92104 : 119" / 3022 mm closed, 149" / 3785 mm extended - PCTC-INDR : 124" / 3150 mm closed, 156" / 3962 mm extended
Impeller diameter	34" / 864 mm
Depth of drum	15" / 381 mm
Impeller housing contour : Hardox 450	Included 1/4"
Number of impeller blades	6 - 1/2" thickness, welded high quality steel
Impeller shaft diameter	2" / 51 mm
Height of impeller center	22" / 559 mm
Rotor RPM	540 RPM
Required RPM for the tractor PTO	540 RPM Opt. 1000 RPM
Number of augers	1
Main auger diameter	34" / 864 mm - dual band, bolted, serrated
Bearing / ductile iron housing	2 1/2" / 64 mm
Drive chain - Main auger	Renold No. 100HV in oil bath
Frame - Sides	Plate 1/4"
Frame - Back	Plate 10 Gauge
Number of shear bolts	1 for impeller + 1 for auger
Drum rotation for hydraulic motor (TRC only)	Std.
Reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c	Opt.
1000/540 RPM drop box with two choices of input shafts	Opt.
Height of speed reducer shaft	14" or 30" (with reducer 150 HP)
Drive shaft included (optional)	T90, choice of yoke depending on the tractor and RPM - (V90 multilobe, choice of yoke depending on tractor and RPM)
Lateral blades - High quality steel	Opt. CL : 3/8" x 4" (increases the width by 3/4") or 3/8" x 5 1/2" with brace (increases the width by 3/4")
Scraper blade - High quality steel	Included 1/2" x 4" reversible, not sharpened
Scraper blade - Semi-industrial made of Hardox 450	Opt. 1/2" x 4" reversible, not sharpened
Scraper blade - Industrial made of Hardox 450	Opt. 1/2" x 6" not reversible, sharpened
Scraper blade - Stainless steel	Opt. 1/2" x 4" reversible, not sharpened
Adjustable skid shoes - Quick adjustment high quality steel	Included (2 skid shoes)
Adjustable skid shoes - Quick adjustment Hardox 450	Opt. (2 skid shoes)
Adjustable skid shoes - Quick adjustment Rocktec	Opt. (2 skid shoes)
Adjustable skid shoes - Quick adjustment stainless steel	Opt. (2 skid shoes)
Chute - Semi-industrial with greasable hinges and removable access panel	Opt.
Chute - Industrial quick attach	Opt.
Chute - 24" or 48" extension	Opt.
Chute - Telescopic including extension cylinders	Opt.
Chute - Telescopic with rounded deflector including extension and deflector cylinders	Opt.
Chute rotation system - Hydraulic motor kit (motor not included)	Included
Chute rotation maximum angle - Hydraulic motor rotation	305°
Antifriction for chute	Included : ring
Deflector - Hydraulic cylinder	Opt.
Color	Included : Industrial Yellow
Storage support	Included
Center of gravity from 3 point hitch at its shortest	44" / 1118 mm
Rotational force (reference)	169 180 lbs-po
Weight including chute (TRC model)	3845 lbs / 1744 kg