H1-8026

H1 7426
  1. H1 7426 A
  2. H1 7426 B
  3. H1 7426 C

Working width

80" / 2032 mm

HP recommended

40 to 65 HP PTO

Cutting height 30" / 762 mm
Drum diameter 26" / 660 mm
Weight 820 lbs / 372 kg
Add to compare
Download the flyer

Options

CHOICE OF HYDRAULIC MOTOR FOR CHUTE ROTATION

Hydraulic motor for pump with less than 10 GPM (with cushion valve) MLH-125
  • Kit of two unidirectional restrictors
RSP-1/16x10 ORB
Hydraulic motor for pump with less than 12 GPM (with cushion valve and unidirectional restrictors) MLH-250-R

POWER TAKE-OFF (PTO)

Pa

PA-06

Bigger PTO PA-06

Other recommended products

Additional Information

Front Mounted System

ALL TRACTOR FROM 30 TO 150 HP

We can supply the components required to carry out your project.

170 04981web

ROTATION INVERTER FOR TRACTOR 30 HP TO 75 HP maximum

1 Rotation inverter (2 gear boxes + 2 lateral plates):
- Available ratios 1 : 1 │ 1 : 1.12 │ 1 : 1.25
- Shaft center to center: adjustable from 10" to 13"
- Female input 1 3/8"-6
- Male input 1 3/8"-6

ROTATION INVERTER FOR TRACTOR 75 HP TO 150 HP maximum

1 Rotation inverter (2 gear boxes + 2 lateral plates):
- Ratio 1 : 1
- Shaft center to center: minimum 11"
- Male input 1 3/4"-20
- Male input 1 3/4"-20

OTHER COMPONENTS FOR TRACTOR 30 HP TO 150 HP

2 & 3 Drive assemblies as required.
4 Drive shaft with key way.
5 Spacer (shim for bearing).
6 Adaptor.
7 & 8 Bearing with pillow block.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

HYDRAULIC DRIVEN

It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.

Contact your Pronovost dealer to obtain for your specific requirements.

Hyd2 Har

HYDRAULIC WHEELS

Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.

  • Practical to avoid blowing gravel.
  • Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

Roues Wheels 1 Har

Complete specifications

HP recommended (min. - max.) 40 to 65 HP PTO
Working width 80" / 2032 mm
Cutting height 30" / 762 mm
Hitch category 1
Impeller diameter 26" / 660 mm
Depth of drum 10 1/2" / 267 mm
Impeller housing contour : High quality steel Included
Number of impeller blades 4
Impeller shaft diameter 1 9/16" / 40 mm
Height of impeller center 16 1/2" / 419 mm
Rotor RPM 540 RPM
Required RPM for the tractor PTO 540 RPM
Number of augers 1
Main auger diameter 19" / 483 mm
Bearing / ductile iron housing 1 1/4" / 32 mm
Drive chain - Main auger 60
Number of shear bolts 1 for impeller + 1 for auger
Drive shaft included (optional) T50 (T60)
Scraper blade - High quality steel Included 3/8" x 3" not reversible, not sharpened
Adjustable skid shoes - Quick adjustment high quality steel Included
Chute - Semi-industrial with greasable hinges, no door Included
Chute rotation system - Hydraulic motor kit (motor not included) Included
Chute rotation maximum angle - Hydraulic motor rotation 195° to 335° adjustable
Antifriction for chute Included : ring
Deflector - Hydraulic cylinder Included
Color Included : Red
Storage support Included
Weight 820 lbs / 372 kg
Weight including chute 820 lbs / 372 kg

Design and specification subject to change without notice.

Videos

No video for this product

Photo gallery

  • H1 7426 G01

    Model H1-7426

  • H1 7426 G02

    Model H1-7426

  • H1 7426 G03

    Model H1-7426

  • H1 7426 G04

    Model H1-7426

  • H1 7426 G05

    Model H1-7426

  • H1 7426 G06

    Model H1-7426

  • H1 7426 G01
  • H1 7426 G02
  • H1 7426 G03
  • H1 7426 G04
  • H1 7426 G05
  • H1 7426 G06