H1-8026
Working width |
80" / 2032 mm |
HP recommended |
40 to 65 HP PTO |
| Cutting height | 30" / 762 mm |
| Drum diameter | 26" / 660 mm |
| Weight | 820 lbs / 372 kg |
Options
CHOICE OF CHUTE
| Semi-industrial chute with greasable hinges, no access panel. | HSI-5472 |
CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR
| Hydraulic cylinder (included) | 25TR04 |
|
TSB-4864 |
| Manual telescopic tube | T-4864 |
HYDRAULIC MOTOR FOR CHUTE ROTATION
| Hydraulic motor (included) | MLH-250-R |
HOSE KITS
PKB-GR1
| Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder and the chute rotation motor. * Installation not included. | PKB-GR1 |
SPEED REDUCER
PR-7502-1
PR-7202-2
PRC-6502-1
| Inverter 540/540 RPM (1:1) - 75 HP at 540 RPM - 2 gears - shafts 4.855" c/c | PR-7502-1 |
| Speed reducer inverter 1000/555 RPM (1.8:1) - 85 HP at 1000 RPM - 2 gears - shafts 4.855" c/c | PR-7202-2 |
| Non-inverting PTO drop box 540/540 RPM (1:1) - 55 HP at 540 RPM - chain - shafts 6.5" c/c | PRC-6502-1 |
CHOICE OF POWER TAKE-OFF (PTO)
| T50 PTO 1 3/8"-6 & 1 3/8"-6 (540 RPM) | 8114 |
| T60 PTO 1 3/8"-6 & 1 3/8"-6 (540 RPM) | 8202 |
| T60 PTO 1 3/8"-21 & 1 3/8"-6 (1000 RPM) | 8202-1 |
Additional Information
HYDRAULIC DRIVEN
It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.
Contact your Pronovost dealer to obtain for your specific requirements.
HYDRAULIC WHEELS
Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.
- Practical to avoid blowing gravel.
- Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
*Available only on a new snowblower made in production.
Complete specifications
| HP recommended (min. - max.) | 40 to 65 HP PTO |
| Working width | 80" / 2032 mm |
| Cutting height | 30" / 762 mm |
| Hitch category | 1 |
| Impeller diameter | 26" / 660 mm |
| Depth of drum | 10 1/2" / 267 mm |
| Impeller housing contour : High quality steel | Included |
| Number of impeller blades | 4 |
| Impeller shaft diameter | 1 9/16" / 40 mm |
| Height of impeller center | 16 1/2" / 419 mm |
| Rotor RPM | 540 RPM |
| Required RPM for the tractor PTO | 540 RPM |
| Number of augers | 1 |
| Main auger diameter | 19" / 483 mm |
| Bearing / ductile iron housing | 1 1/4" / 32 mm |
| Drive chain - Main auger | 60 |
| Number of shear bolts | 1 for impeller + 1 for auger |
| Drive shaft included (optional) | T50 (T60) |
| Scraper blade - High quality steel | Included 3/8" x 3" not reversible, not sharpened |
| Adjustable skid shoes - Quick adjustment high quality steel | Included |
| Chute - Semi-industrial with greasable hinges, no door | Included |
| Chute rotation system - Hydraulic motor kit (motor not included) | Included |
| Chute rotation maximum angle - Hydraulic motor rotation | 195° to 335° adjustable |
| Antifriction for chute | Included : ring |
| Deflector - Hydraulic cylinder | Included |
| Color | Included : Red |
| Storage support | Included |
| Weight including chute | 820 lbs / 372 kg |
Design and specification subject to change without notice.