PGS-800
Working width |
80" / 2032 mm |
HP recommended |
45 to 75 HP PTO |
| Cutting height | 36 3/4" / 933 mm |
| Approx. performance | 650 tons imp. / hour |
| Weight | 1565 lbs / 710 kg |
Options
HOSE KITS
PKB-GR1
| Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder and the chute rotation motor. * Installation not included. | PKB-GR1 |
Other recommended products
Additional Information
HYDRAULIC DRIVEN
It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
HYDRAULIC WHEELS
Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.
- Practical to avoid blowing gravel.
- Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
*Available only on a new snowblower made in production.
Complete specifications
| HP recommended (min. - max.) | 45 to 75 HP PTO |
| Approximate performance | 650 tons imp. / hour |
| Working width | 80" / 2032 mm |
| Cutting height | 36 3/4" / 933 mm |
| Hitch category | 2 - 30 1/2" / 775 mm |
| Cutting height of lateral blades | Included : 58 1/2" / 1486 mm |
| Height of chute base | 35" / 889 mm |
| Impeller diameter | 28" / 711 mm |
| Depth of drum | 10 1/2" / 267 mm |
| Impeller housing contour : Hardox 450 | Included 3/16" |
| Number of impeller blades | 4 - 3/8" thickness - welded high quality steel |
| Impeller shaft diameter | 1 9/16" / 40 mm |
| Height of impeller center | 18" / 457 mm |
| Rotor RPM | 540 RPM |
| Required RPM for the tractor PTO | 540 RPM |
| Number of augers | 1 |
| Main auger diameter | 28" / 711 mm - double ribonned, welded, toothed |
| Bearing / ductile iron housing | Right : 1 1/2" / 38 mm - Left : 2" / 51 mm |
| Drive chain - Main auger | Renold No. 80HV in oil bath |
| Number of shear bolts | 1 for auger+ 1 for impeller |
| Drive shaft included (optional) | T60 |
| Lateral blades - High quality steel | Included : 5/16" x 3 1/2" |
| Scraper blade - Semi-industrial made of Hardox 450 | Included 3/8" x 7" not reversible, not sharpened |
| Scraper blade - Stainless steel | Opt. 3/8" x 7" not reversible, not sharpened |
| Adjustable skid shoes - Quick adjustment high quality steel | Included (2 skid shoes) |
| Adjustable skid shoes - Quick adjustment Rocktec | Opt. (2 skid shoes) |
| Adjustable skid shoes - Quick adjustment stainless steel | Opt. (2 skid shoes) |
| Chute - Semi-industrial with greasable hinges and removable access panel | Included |
| Chute rotation system - Hydraulic motor kit (motor not included) | Included with MLH-250 and cushion valve |
| Chute rotation maximum angle - Hydraulic motor rotation | 270° to 345° adjustable |
| Antifriction for chute | Included : ring |
| Deflector - Hydraulic cylinder | Included |
| Color | Included Frame : Industrial yellow. Auger and chute : Red Pronovost |
| Center of gravity from 3 point hitch at its shortest | 30 1/2" / 775 mm |
| Rotational force (reference) | 47 733 lbs-po |
| Weight including chute | 1565 lbs / 710 kg |
Design and specifications subject to change without notice.
Videos
No video for this product