H2-9834 / H2-9834TRC

H2 8628
  1. H2 8628 A
  2. H2 8628 B
  3. H2 8628 C

Working width

98" / 2489 mm

HP recommended

90 to 125 HP PTO

Cutting height 40" / 1016 mm
Drum diameter 34" / 864 mm
Weight Reg. : 2082 lbs / 944 kg TRC : 2232 lbs / 1012 kg
Add to compare
Download the flyer

Options

CHOICE OF HYDRAULIC MOTOR FOR CHUTE ROTATION

Hydraulic motor for pump with less than 12 GPM (with cushion valve and unidirectional restrictors) MLH-250-R
Hydraulic motor for pump with more than 12 GPM (with cushion valve and unidirectional restrictors) MLH-315-R

HYDRAULIC MOTOR FOR ROTARY DRUM (TRC MODELS ONLY)

Hydraulic motor for rotary drum
  • For pump with less than 12 GPM (with cushion valve and unidirectional restrictors)
MLH-250-R
  • For pump with more than 12 GPM (with cushion valve and unidirectional restrictors)
MLH-315-R

POWER TAKE-OFF (PTO)

Pv

PV-08

Pa

PA-09

Pav

PAV-09

PTO multilobe PV-08
Bigger PTO PA-09
Bigger PTO multilobe PAV-09

Other recommended products

Additional Information

HYDRAULIC DRIVEN

It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.

Contact your Pronovost dealer to obtain for your specific requirements.

Hyd2 Har

HYDRAULIC WHEELS

Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.

  • Practical to avoid blowing gravel.
  • Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

Roues Wheels 1 Har

Complete specifications

HP recommended (min. - max.) 90 to 125 HP PTO
Working width 98" / 2489 mm
Cutting height 40" / 1016 mm
Hitch category 2 - 34 1/2" / 876 mm c/c
Impeller diameter 34" / 864 mm
Depth of drum 12" / 305 mm
Impeller housing contour : High quality steel Included
Number of impeller blades 6
Impeller shaft diameter 2" / 51 mm
Height of impeller center 21" / 533 mm
Rotor RPM 540 RPM
Required RPM for the tractor PTO 540 RPM Opt. 1000 RPM
Number of augers 1
Main auger diameter 23" / 584 mm
Bearing / ductile iron housing 1 1/2" / 38 mm
Drive chain - Main auger 80
Number of shear bolts 1 for impeller + 1 for auger
Drum rotation for hydraulic motor (TRC only) Std.
Reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c Opt.
Drive shaft included (optional) T80 (V80, T90 & V90)
Scraper blade - High quality steel Included 1/2" x 4" reversible, not sharpened
Adjustable skid shoes - Quick adjustment high quality steel Included
Chute - Semi-industrial with greasable hinges, no door Included
Chute rotation system - Hydraulic motor kit (motor not included) Included
Chute rotation maximum angle - Hydraulic motor rotation 305°
Antifriction for chute Included : ring
Deflector - Hydraulic cylinder Included
Color Included : Red
Storage support Included
Weight Reg. : 2082 lbs / 944 kg TRC : 2232 lbs / 1012 kg
Weight including chute 2082 lbs / 944 kg
Weight including chute (TRC model) 2232 lbs / 1012 kg

Design and specifications subject to change without notice.

Videos

No video for this product

Photo gallery

  • H2 8628 G01

    Model H2-8628

  • H2 8628 G02

    Model H2-8628

  • H2 8628 G01
  • H2 8628 G02