H2-8628 / H2-8628TRC
CHOICE OF HYDRAULIC MOTOR FOR CHUTE ROTATION
|Hydraulic motor for pump with less than 12 GPM (with cushion valve and unidirectional restrictors)||MLH-250-R|
|Hydraulic motor for pump with more than 12 GPM (with cushion valve and unidirectional restrictors)||MLH-315-R|
POWER TAKE-OFF (PTO)
|Bigger PTO multilobe||PAV-08|
It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.
Contact your Pronovost dealer to obtain for your specific requirements.
Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.
- Practical to avoid blowing gravel.
- Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
|HP recommended (min. - max.)||50 to 80 HP PTO|
|Working width||86" / 2184 mm|
|Cutting height||36" / 914 mm|
|Hitch category||1 & 2|
|Impeller diameter||28" / 711 mm|
|Depth of drum||12" / 305 mm|
|Impeller housing contour : High quality steel||Incluse|
|Number of impeller blades||4|
|Impeller shaft diameter||1 9/16" / 40 mm|
|Height of impeller center||17 1/2" / 444 mm|
|Rotor RPM||540 RPM|
|Required RPM for the tractor PTO||540 RPM Opt. 1000 RPM|
|Number of augers||1|
|Main auger diameter||23" / 584 mm|
|Bearing / ductile iron housing||1 1/4" / 32 mm|
|Drive chain - Main auger||80|
|Number of shear bolts||1 for impeller + 1 for auger|
|Drum rotation for hydraulic motor (TRC only)||Std.|
|Reducer 1000/540 RPM - 150 HP at 1000 RPM - Renold triple chain - shafts 8" c/c||Opt.|
|Drive shaft included (optional)||T60 (T80 & V80)|
|Scraper blade - High quality steel||Included 1/2" x 4" reversible, not sharpened|
|Adjustable skid shoes - Quick adjustment high quality steel||Included|
|Chute - Semi-industrial with greasable hinges, no door||Included|
|Chute rotation system - Hydraulic motor kit (motor not included)||Included|
|Chute rotation maximum angle - Hydraulic motor rotation||305°|
|Antifriction for chute||Included : ring|
|Deflector - Hydraulic cylinder||Included|
|Color||Included : Red|
|Weight||Reg. : 1496 lbs / 679 kg TRC : 1634 lbs / 741 kg|
|Weight including chute||1496 lbs / 679 kg|
|Weight including chute (TRC model)||1634 lbs / 741 kg|
Design and specifications subject to change without notice.
No video for this product