CHOICE OF CHUTE
|Semi-industrial chute with greasable hinges, no access panel.||HSI-7486|
CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR
|Hydraulic cylinder (included)||25TR08|
HYDRAULIC MOTOR FOR CHUTE ROTATION
|Hydraulic motor (included)||MLH-250-R|
|Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder and the chute rotation motor. * Installation not included.||PKB-GR2|
|Inverter 540/540 RPM (1:1) - 75 HP at 540 RPM - 2 gears - shafts 4.855" c/c||PR-7502-1|
|Speed reducer inverter 1000/555 RPM (1.8:1) - 85 HP at 1000 RPM - 2 gears - shafts 4.855" c/c||PR-7202-2|
|Drop box 1000/540 RPM. Two choices of input shafts : Reducer inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or reducer only 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c||PRH-25M-1|
CHOICE OF POWER TAKE-OFF (PTO)
|T50 PTO 1 3/8"-6 & 1 3/8"-6 (540 RPM)||8114|
|T60 PTO 1 3/8"-6 & 1 3/8"-6 (540 RPM)||8202|
|T60 PTO 1 3/8"-21 & 1 3/8"-6 (1000 RPM)||8202-1|
It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.
Contact your Pronovost dealer to obtain for your specific requirements.
Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.
- Practical to avoid blowing gravel.
- Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
|HP recommended (min. - max.)||50 to 70 HP PTO|
|Working width||80" / 2032 mm|
|Cutting height||34" / 864 mm|
|Hitch category||1 & 2|
|Impeller diameter||26" / 660 mm|
|Depth of drum||12" / 305 mm|
|Impeller housing contour : High quality steel||Included|
|Number of impeller blades||4|
|Impeller shaft diameter||1 9/16" / 40 mm|
|Height of impeller center||16 1/2" / 419 mm|
|Rotor RPM||540 RPM|
|Required RPM for the tractor PTO||540 RPM Opt. 1000 RPM|
|Number of augers||1|
|Main auger diameter||23" / 584 mm|
|Bearing / ductile iron housing||1 1/4" / 32 mm|
|Drive chain - Main auger||80|
|Number of shear bolts||1 for impeller + 1 for auger|
|Reducer 1000/540 RPM - 150 HP at 1000 RPM - Renold triple chain - shafts 8" c/c||Opt.|
|Drive shaft included (optional)||T50 (T60)|
|Scraper blade - High quality steel||Included 1/2" x 4" reversible, not sharpened|
|Adjustable skid shoes - Quick adjustment high quality steel||Included|
|Chute - Semi-industrial with greasable hinges, no door||Included|
|Chute rotation system - Hydraulic motor kit (motor not included)||Included|
|Chute rotation maximum angle - Hydraulic motor rotation||305°|
|Antifriction for chute||Included : ring|
|Deflector - Hydraulic cylinder||Included|
|Color||Included : Red|
|Weight||1438 lbs / 652 kg|
|Weight including chute||1438 lbs / 652 kg|
Design and specifications subject to change without notice.
No video for this product