P-INV-80

P Inv
  1. P Inv A
  2. P Inv B
  3. P Inv C

Working width

80" / 2032 mm

HP recommended

40 to 70 HP PTO

Cutting height 28" / 711 mm
Drum diameter 26" / 660 mm
Weight 990 lbs / 449 kg
Add to compare
Download the flyer

Options

CHOICE OF COLORS

Red PRONOVOST
Blue NEW HOLLAND PG2-02
Blue LANDINI PG2-03
Orange KUBOTA PG2-04
Yellow INDUSTRIAL PG2-06
Green JOHN DEERE PG2-07

SCRAPER BLADE

T Vgr2

INV-TV-80

Ss Tgr2

INV-SST-80

Sit1gr2

INV-SIT1-80

Tivar scraper blade for P-INV-80 INV-TV-80
Stainless Steel scraper blade for P-INV-80 INV-SST-80
Semi-industrial scraper blade, carbon steel 450, 1/2" x 4", for P-INV-80 INV-SIT1-80

REAR MOUNT SCRAPER BLADE AND OPTIONS

Rear mount scraper (scraper not included) P-INVL-80
Standard steel plow blade for P-INVL-80 INVL-ST-80
Tivar plow blade for P-INVL-80 INVL-TV-80
Stainless Steel plow blade for P-INVL-80 INVL-SST-80
Mounting assembly for rear mount scraper cylinder INVL-HYD-7480
Kit of 2 cylinders for rear mount scraper 2 X 25TR04
Kit of chains for rear mount scraper INVL-CH-7480

Other recommended products

Additional Information

HYDRAULIC WHEELS

Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it.

  • Practical to avoid blowing gravel.
  • Permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.

Contact your Pronovost dealer to obtain a quote for your specific requirements.

Roues Wheels 1

Complete specifications

HP recommended (min. - max.) 40 to 70 HP PTO
Working width 80" / 2032 mm
Cutting height 28" / 711 mm
Hitch category 1 - 28 1/2" / 724 mm c/c
Impeller diameter 26" / 660 mm
Depth of drum 10 1/2" / 267 mm
Impeller housing contour : High quality steel Included
Number of impeller blades 4
Impeller shaft diameter 1 9/16" / 40 mm
Height of impeller center 15" / 381 mm
Rotor RPM 540 RPM
Required RPM for the tractor PTO 540 RPM
Number of augers 1
Main auger diameter 16" / 406 mm
Bearing / ductile iron housing 1 1/4" / 32 mm
Drive chain - Main auger 60
Number of shear bolts 1 for impeller + 1 for auger
Drive shaft included (optional) T50
Scraper blade - High quality steel Included 1/2" x 3" not reversible, not sharpened
Scraper blade - Semi-industrial made of Hardox 450 Opt. 1/2" x 3" not reversible, not sharpened
Scraper blade - Tivar Opt. 1" thickness, not reversible, not sharpened
Scraper blade - Stainless steel Opt. 1/2" x 4" not reversible, not sharpened
Chute - Semi-industrial with greasable hinges and removable access panel Included
Chute rotation system - Hydraulic motor kit (motor not included) Included with MLH-125 and cushion valve
Chute rotation maximum angle - Hydraulic motor rotation 305°
Antifriction for chute Included : ring
Deflector - Hydraulic cylinder Included
Color Included : Red Pronovost Opt. : Choice of 5 colors
Weight 990 lbs / 449 kg
Weight approx. blade and cylinder 94 lbs / 43 kg
Weight including chute 990 lbs / 449 kg

Design and specifications subject to change without notice.

Videos

Photo gallery

  • P Inv G01

    Drive shaft connected to the gear box on the front of the snowblower

  • P Inv G01