PXPL-92-98
| HP recommended | 75 - 125 HP PTO |
| Working width | 98" | 2489 mm |
| Cutting height | 34" | 864 mm |
| Impeller diameter | 32" | 813 mm |
| Weight including chute | 2191 lbs | 994 kg 4 |
PXPL-92-98
| HP recommended | 75 - 125 HP PTO |
| Working width | 98" | 2489 mm |
| Cutting height | 34" | 864 mm |
| Impeller diameter | 32" | 813 mm |
| Weight including chute | 2191 lbs | 994 kg 4 |
- Options
- Other products recommended
- Complementary informations
- Complete specifications
- Photos/videos
Options
COMBOS ― BASIC OPTIONS GROUPS
| List of options as per combo.
Important : If you prefer, you can also adjust your configuration according to your needs by choosing from the options below. |
Combo PXPL-92-98 9225 | PTO PSIG-7486 | Semi-industrial chute MLH-315-R | Chute rotation motor 25TR08 | Deflector cylinder |
CHOICE OF CHUTE
PSIG-7486
| Semi-industrial chute with greasable hinges and access panel (removable) | PSIG-7486 |
CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR
| Hydraulic cylinder (included) | 25TR08 |
| Manual telescopic tube | T-74104 |
HYDRAULIC MOTOR FOR CHUTE ROTATION
| Hydraulic motor (included) | MLH-315-R |
HOSE KITS
PKB-PXPL-8698
| Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder, the hydraulic system controlling the blade and the chute rotation motor. Installation not included. | PKB-PXPL-8698 |
SCRAPER BLADES
SIT1-98
T1-98
TV-98
SST-98
| Semi-industrial scraper blade, carbon steel 450, reversible 1/2" x 4" not sharpened | SIT1-98 |
| Industrial scraper blade, carbon steel 450, not reversible 1/2" x 6" sharpened | T1-98 |
| Tivar scrapper blade, mounting kit included | TV-98 |
| Stainless Steel scraper blade, reversible, 1/2" x 4" not sharpened | SST-98 |
SKID SHOES
PHD-92104
PSHD-92104
PST-92104
| Industrial skid shoes with Hardox 450 soles | PHD-92104 |
| Skid shoes with ROCKTEC soles | PSHD-92104 |
| Skid shoes with stainless steel soles | PST-92104 |
SPEED REDUCER
PRH-30M-2
PRH-25M-2
| Speed reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c | PRH-30M-2 |
| Drop box 1000/540 RPM. Two choices of input shafts : Reducer inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or reducer only 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c | PRH-25M-2 |
CHOICE OF POWER TAKE-OFF (PTO)
| T80 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9225 |
| T80 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9569 |
| T80 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) | 9569-1 |
| V80 Multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9225-V |
| V80 Multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9569-V |
| T90 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9475 |
| T90 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9475-1 |
| T90 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) | 9475-2 |
| V90 Multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9598 |
| V90 Multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9599 |
| V90 Multilobe PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) | 9604 |
X-PRO BLADE OPTIONS
PXPLHD-98
PXPLTV-98
PXPLST-98
| Carbon steel 450 scraper blade and skid shoes | PXPLHD-98 |
| Tivar scraper blade and skid shoes for PXPL Snowblower | PXPLTV-98 |
| Stainless Steel scraper blade and skid shoes for PXPL Snowblower | PXPLST-98 |
CHOICE OF COLORS
Blue
Orange
INDUSTRIAL Yellow
Green
KIO Orange
Black
| PRONOVOST Red | Included |
| Blue | PX-02 |
| Orange | PX-04 |
| INDUSTRIAL Yellow | PX-06 |
| Green | PX-07 |
| KIO Orange | PX-09 |
| Black | PX-10 |
Finding the right snowblower
Complementary informations
HYDRAULIC DRIVEN
It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
HYDRAULIC WHEELS FOR SNOWBLOWERS
Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it. Practical to avoid blowing gravel, they permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.
*Available only on a new snowblower made in production.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
CHUTE HEIGHTS
To view the table of chute height measurements, click on the link below :
Chute heights table
Complete specifications
| HP recommended | 75 - 125 HP PTO |
| Working width | 98" | 2489 mm |
| Working width - X-PRO blade | 99 3/4" | 2534 mm |
| Cutting height | 34" | 864 mm |
| Cutting height | 8" | 203 mm |
| Height - Chute base | 43" | 1092 mm |
| Impeller diameter | 32" | 813 mm |
| Depth of drum | 12" | 305 mm |
| Impeller housing contour : High quality steel | Included |
| Number of impeller blades | 5 |
| Impeller shaft diameter | 2" | 51 mm |
| Height of impeller center | 18 1/4" | 464 mm |
| Rotor RPM | 540 RPM |
| Required RPM for the tractor PTO | 540 RPM - Opt. 1000 |
| Number of augers | 1 |
| Main auger diameter | 19 1/2" | 495 mm |
| Drive chain - Main auger | 80 |
| Hitch category | 2 - 35" | 889 mm c/c |
| Number of shear bolts | 1 for impeller + 1 for auger |
| PRH-25M-2: Drop box 1000/540 RPM. Two choice of input shafts : Speed reducer and inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or non-inverter reducer 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c | Option : PRH-25M-2 |
| PRH-30M-2: Speed reducer 1000/555 RPM - 220 HP at1000 RPM - 3 gears - shafts 7 1/16" c/c | Option : PRH-30M-2 |
| Scraper blade - High quality steel | Included : 1/2" x 4" reversible, not sharpened |
| Scraper blade - Semi-industrial made of Hardox 450 | Option : SIT1-98 1/2" x 4" reversible, not sharpened |
| Scraper blade - Industrial made of Hardox 450 | Option : T1-98 1/2" x 6" not reversible, sharpened |
| Scraper blade - Tivar | Option : TV-98 1" thickness, not reversible, not sharpened |
| Scraper blade - Stainless steel | Option : SST-98 1/2" x 4" reversible, not sharpened |
| Adjustable skid shoes - Quick adjustment high quality steel | Included |
| Adjustable skid shoes - Quick adjustment Hardox 450 | Option : PHD-92104 |
| Adjustable skid shoes - Quick adjustment Hardox 600 | Option : PSHD-92104 |
| Adjustable skid shoes - Quick adjustment stainless steel | Option : PST-92104 |
| Blade and skid shoes on X-PRO blade - High quality steel | Included |
| Blade and skid shoes on X-PRO blade - Hardox 450 | Option : PXPLHD-98 |
| Blade and skid shoes on X-PRO blade - Tivar | Option : PXPLTV-98 |
| Blade and skid shoes on X-PRO blade - Stainless steel | Option : PXPLST-98 |
| Chute - Semi-industrial with greasable hinges and removable access panel | Included : PSIG-7486 |
| Chute rotation system - Hydraulic motor kit (motor not included) | Included with MLH-315-R and cushion valve |
| Chute maximum rotation angle - Hydraulic motor | 305° |
| Antifriction for chute | Included : ring |
| Deflector - Hydraulic cylinder option | Included : 25TR08 |
| Bearing / ductile iron casting | 1 1/2" | 38 mm |
| PTO | Included : T80 - Option : T90 |
| Color (including primer) | Included : Pronovost Red Opt. : Choice of 6 colors |
| Storage support | Included |
| Weight including chute | 2191 lbs | 994 kg 4 |
Design and specifications subject to change without notice.
1 Weight without drive shaft.
2 Weight including chute.
3 Weight without chute.
4 Including chute PSIG-7486, drive shaft and hydraulic motor.
5 Including chute and cylinder.
6 Weight including chute, chute cylinder and rotation hydraulic motor.
7 Weight including telescopic chute.
8 Weight including telescopic chute and reducer.
9 Weight with chute PSIG.
Photos/videos
