PGS-1080TRC
| HP recommended | 100 - 150 HP PTO |
| Working width | 108" │ 2743 mm |
| Cutting height | 47 1/2" │ 1207 mm |
| Impeller diameter | 34" │ 864 mm |
| Weight including chute (TRC model) | 3936 lbs │ 1785 kg 7 |
PGS-1080TRC
| HP recommended | 100 - 150 HP PTO |
| Working width | 108" │ 2743 mm |
| Cutting height | 47 1/2" │ 1207 mm |
| Impeller diameter | 34" │ 864 mm |
| Weight including chute (TRC model) | 3936 lbs │ 1785 kg 7 |
- Options
- Other products recommended
- Complementary informations
- Complete specifications
- Photos/videos
Options
COMBOS ― BASIC OPTIONS GROUPS
| List of options as per combo.
Important : If you prefer, you can also adjust your configuration according to your needs by choosing from the options below. |
Combo PGS-1080TRC 9475 | PTO PSIG-92104 | Semi-industrial chute MLH-315-R | Chute rotation motor 25TR08 | Deflector cylinder MLH-315-R | Drum rotation motor |
CHOICE OF CHUTE
PSIG-92104
PCG-92104
PRP-92104-2
PRP-92104
PCT-92104
PCTC-INDR
| Semi-industrial chute with greasable hinges and removable access panel, including hose support for deflector cylinder | PSIG-92104 |
| Quick attach industrial chute with greasable hinges and removable access panel. | PCG-92104 |
| • 24" Extension for industrial chute | PRP-92104-2 |
| • 48" Extension for industrial chute | PRP-92104 |
| Hydraulic telescopic industrial chute, a versatile chute for general use, including chute extension cylinders. | PCT-92104 |
| • Mounting kit for working light on telescopic chute. | PKL-IND |
| Hydraulic telescopic industrial chute with rounded deflector designed for truck loading, greasable hinges and access panel, including 2 extension cylinders and hose support and 2 deflector cylinders. | PCTC-INDR |
| • Mounting kit for working light on telescopic chute. | PKL-IND |
CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR
| Hydraulic cylinder (included) | 25TR08 |
HYDRAULIC MOTOR FOR CHUTE ROTATION
| Hydraulic motor (included) | MLH-315-R |
HOSE KITS
PKB-GR3TRC
| Kit for TRC models, also includes hoses for drum rotation motor. * Installation not included. | PKB-GR3TRC |
| Kit for TRC models with telescopic chute PCT-92104, also includes hoses for chute lifting cylinders. * Installation not included. | PKB-GR3TRC-T |
| Kit for TRC models with telescopic chute with round deflector PCTC-INDR, also includes hoses for chute lift cylinders and cylinder for round deflector adjustment. * Installation not included. | PKB-GR3TRC-TR |
LATERAL BLADES
CL-1020PGS
| Lateral blades, standard steel 3/8" x 5 1/2" x 78" with brace | CL-1020PGS |
SCRAPER BLADES
SIT1-108
T1-108
SST-108
| Semi-industrial scraper blade, carbon steel 450, reversible 1/2" x 4" not sharpened | SIT1-108 |
| Industrial scraper blade, carbon steel 450, not reversible 1/2" x 6" sharpened | T1-108 |
| Stainless Steel scraper blade, reversible, 1/2" x 4" not sharpened | SST-108 |
SKID SHOES
PHD-PGS
PSHD-PGS
PST-PGS
| Industrial skid shoes with Hardox 450 soles | PHD-PGS |
| Skid shoes with ROCKTEC soles | PSHD-PGS |
| Skid shoes with stainless steel soles | PST-PGS |
SPEED REDUCER
PRH-30M-2
PRH-25M-2
PR3G200-2
| Speed reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c | PRH-30M-2 |
| Drop box 1000/540 RPM. Two choices of input shafts : Reducer inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or reducer only 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c | PRH-25M-2 |
| Reducer 1000/555 (200 HP at 1000 RPM) 3 gears - 8" c/c | PR3G200-2 |
CHOICE OF POWER TAKE-OFF (PTO)
| T90 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9475 |
| T90 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9475-1 |
| T90 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) | 9475-2 |
| V90 multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9598 |
| V90 multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9599 |
| V90 multilobe PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) | 9604 |
KIT OF 3 OR 4 DIVERTERS FOR JOYSTICK (not included)
KVD
| Kit of 3 electric directionnal control valves to control 4 hydraulic functions (chute deflector, chute rotation, telescopic chute and TRC drum) including universal mounting bracket, hoses and fittings. | KVD-3IND |
| Kit of 4 electric directionnal control valves to control 5 hydraulic functions (chute deflector, chute rotation, telescopic chute, TRC drum and hydraulic lateral blades) including universal mounting bracket, hoses and fittings. | KVD-4IND |
Finding the right snowblower
Complementary informations
HYDRAULIC DRIVEN
It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
HYDRAULIC WHEELS FOR SNOWBLOWERS
Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it. Practical to avoid blowing gravel, they permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.
*Available only on a new snowblower made in production.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
CHUTE HEIGHTS
To view the table of chute height measurements, click on the link below :
Chute heights table
Complete specifications
| HP recommended | 100 - 150 HP PTO |
| Approximate performance | 1500 tons imp. / hour (tractor 150 HP) |
| Working width | 108" │ 2743 mm |
| Cutting height | 47 1/2" │ 1207 mm |
| Cutting height of lateral blades | Option CL : 66" │ 1676 mm ou 78" │ 1981 mm |
| Lateral blades - High quality steel | Option : CL 3/8" x 4" (increase width by 3/4") or 3/8" x 5 1/2" with brace (increase the width by 3/4") |
| Height of chute base (TRC model) | 49 1/2" │ 1257 mm |
| Height with telescopic chute (TRC model) | PCT-92104 : 119" │ 3022 mm closed, 149" │ 3785 mm extended PCTC-INDR : 124" │ 3150 mm closed, 156" │ 3962 mm extended |
| Impeller diameter | 34" │ 864 mm |
| Depth of drum | 15" │ 381 mm |
| Drum position | Center |
| Impeller housing contour : Hardox 450 | Included : 1/4" |
| Number of impeller blades | 6 - 1/2" thickness, high quality steel, welded |
| Impeller shaft diameter | 2" │ 51 mm |
| Height of impeller center | 22" │ 559 mm |
| Rotor RPM | 540 RPM |
| Required RPM for the tractor PTO | 540 RPM - Opt. 1000 RPM |
| Number of augers | 1 |
| Main auger diameter | 34" │ 864 mm - double ribboned, bolted, serrated |
| Drive chain - Main auger | Renold No. 100HV in oil bath |
| Hitch category | 2 - 38 1/2" │ 978 mm |
| Frame - Sides | Plate 1/4" |
| Frame - Back | Plate 10 Gauge |
| Number of shear bolts | 1 for impeller + 1 for auger |
| Drum rotation for hydraulic motor (TRC only) | Included with MLH-315-R and cushion valve |
| PR3G200-2: Speed reducer 1000/555 (200 ch à 1000 RPM) 3 gears - 8" c/c | Option : PR3G200-2 |
| PRH-25M-2: Drop box 1000/540 RPM. Two choice of input shafts : Speed reducer and inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or non-inverter reducer 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c | Option : PRH-25M-2 |
| PRH-30M-2: Speed reducer 1000/555 RPM - 220 HP at1000 RPM - 3 gears - shafts 7 1/16" c/c | Option : PRH-30M-2 |
| Height of speed reducer shaft | 14" or 30" (with reducer 150 HP) |
| Scraper blade - High quality steel | Included : 1/2" x 4" reversible, not sharpened |
| Scraper blade - Semi-industrial made of Hardox 450 | Option : SIT1-108 1/2" x 4" reversible, not sharpened |
| Scraper blade - Industrial made of Hardox 450 | Option : T1-108 1/2" x 6" not reversible, sharpened |
| Scraper blade - Stainless steel | Option : SIT1-108 2 1/2" x 4" reversible, not sharpened |
| Adjustable skid shoes - Quick adjustment high quality steel | Included (2 skid shoes) |
| Adjustable skid shoes - Quick adjustment Hardox 450 | Option : PHD-PGS |
| Adjustable skid shoes - Quick adjustment Hardox 600 | Option : PSHD-PGS |
| Adjustable skid shoes - Quick adjustment stainless steel | Option : PST-PGS |
| Chute - Semi-industrial with greasable hinges and removable access panel | Option : PSIG-92104 |
| Chute - Industrial quick attach | Option : PCG-92104 |
| Chute - 24" extension | Option : PRP-92104-2 |
| Chute - 48" extension | Option : PRP-92104 |
| Chute - Telescopic with rounded deflector including extension and deflector cylinders | Option : PCTC-INDR |
| Chute rotation system - Hydraulic motor kit (motor not included) | Inclus avec MLH-315-R et valve d'amortissement |
| Chute maximum rotation angle - Hydraulic motor | 305° |
| Antifriction for chute | Included : ring |
| Deflector - Hydraulic cylinder option | Included : 25TR08 |
| Bearing / ductile iron casting | 2 1/2" │ 64 mm |
| PTO | Included : T90, choice of yoke depending on tractor and RPM Option : V90 multilobe, choice of yoke depending on tractor and RPM |
| Color (including primer) | Included : Industrial Yellow |
| Storage support | Included |
| Center of gravity from the 3 point hitch at its shortest | 44" │ 1118 mm |
| Rotational force (reference) | 169 180 lbs-in |
| Weight including chute (TRC model) | 3936 lbs │ 1785 kg 7 |
Design and specifications subject to change without notice.
1 Weight without drive shaft.
2 Weight including chute.
3 Weight without chute.
4 Including chute PSIG-7486, drive shaft and hydraulic motor.
5 Including chute and cylinder.
6 Weight including chute, chute cylinder and rotation hydraulic motor.
7 Weight including telescopic chute.
8 Weight including telescopic chute and reducer.
9 Weight with chute PSIG.
Photos/videos
