P-1080 / P-1080TRC
| HP recommended | 100 - 150 HP PTO |
| Working width | 108" | 2743 mm |
| Cutting height | 48" | 1219 mm |
| Impeller diameter | 34" | 864 mm |
| Weight including chute | 2530 lbs | 1148 kg 9 |
| Weight including chute (TRC model) | 2850 lbs | 1293 kg 9 |
P-1080 / P-1080TRC
| HP recommended | 100 - 150 HP PTO |
| Working width | 108" | 2743 mm |
| Cutting height | 48" | 1219 mm |
| Impeller diameter | 34" | 864 mm |
| Weight including chute | 2530 lbs | 1148 kg 9 |
| Weight including chute (TRC model) | 2850 lbs | 1293 kg 9 |
- Options
- Other products recommended
- Complementary informations
- Complete specifications
- Photos/videos
Options
COMBOS ― BASIC OPTIONS GROUPS
| List of options as per combo.
Important : If you prefer, you can also adjust your configuration according to your needs by choosing from the options below. |
Combo P-1080 9225 | PTO PSIG-92104 | Semi-industrial chute MLH-315-R | Chute rotation motor 25TR08 | Deflector cylinderCombo P-1080TRC 9225 | PTO PSIG-92104 | Semi-industrial chute MLH-315-R | Chute rotation motor 25TR08 | Deflector cylinder MLH-315-R | Drum rotation motor |
CHOICE OF CHUTE
PSIG-92104
PCG-92104
PRP-92104-2
PRP-92104
PCT-92104
PCTC-INDR
| Semi-industrial chute with greasable hinges and removable access panel, including hose support for deflector cylinder | PSIG-92104 |
| Quick attach industrial chute with greasable hinges and removable access panel, including hose support for deflector cylinder | PCG-92104 |
| • 24" Extension for industrial chute | PRP-92104-2 |
| • 48" Extension for industrial chute | PRP-92104 |
| Hydraulic telescopic industrial chute, a versatile chute for general use, including chute extension cylinders and hose support + hose support for deflector cylinder. Kit of two unidirectional restrictors RSP-1/16x10 ORB included. | PCT-92104 |
| • Mounting kit for working light on telescopic chute. | PKL-IND |
| Hydraulic telescopic industrial chute with rounded deflector designed for truck loading, greasable hinges and access panel, including 2 extension cylinders and hose support and 2 deflector cylinders and hose support. Kit of two unidirectional restrictors RSP-1/16x10 ORB included. | PCT-INDR |
| • Mounting kit for working light on telescopic chute. | PKL-IND |
CHOICE OF ADJUSTMENT FOR CHUTE DEFLECTOR
| Hydraulic cylinder | 25TR08 |
HYDRAULIC MOTOR FOR CHUTE ROTATION
| Hydraulic motor (included) | MLH-315-R |
HOSE KITS
PKB-GR3
PKB-GR3TRC
| Hose kit for basic functions. Includes hydraulic hoses connecting the tractor oil outlets to the deflector adjustment cylinder and the chute rotation motor. * Installation not included. | PKB-GR3 |
| Kit for TRC models, also includes hoses for drum rotation motor. * Installation not included. | PKB-GR3TRC |
| Kit for models with telescopic chute PCT-92104, also includes hoses for chute lifting cylinders. * Installation not included. | PKB-GR3-T |
| Kit for TRC models with telescopic chute PCT-92104, also includes hoses for chute lifting cylinders. * Installation not included. | PKB-GR3TRC-T |
| Kit for models with telescopic chute with round deflector PCTC-INDR, also includes hoses for chute lift cylinders and cylinder for round deflector adjustment. * Installation not included. | PKB-GR3-TR |
| Kit for TRC models with telescopic chute with round deflector PCTC-INDR, also includes hoses for chute lift cylinders and cylinder for round deflector adjustment. * Installation not included. | PKB-GR3TRC-TR |
LATERAL BLADES
CL-98104
| Lateral blades, high quality steel 3/8" x 4" x 66" | CL-98104 |
SCRAPER BLADES
SIT1-108
T1-108
SST-108
| Semi-industrial scraper blade, carbon steel 450, reversible 1/2" x 4" not sharpened | SIT1-108 |
| Industrial scraper blade, carbon steel 450, not reversible 1/2" x 6" sharpened | T1-108 |
| Stainless steel scraper blade, reversible, 1/2" x 4" not sharpened | SST-108 |
SKID SHOES
PHD-92104
PSHD-92104
PST-92104
| Industrial skid shoes with Hardox 450 soles | PHD-92104 |
| Skid shoes with Hardox 600 soles | PSHD-92104 |
| Skid shoes with stainless steel soles | PST-92104 |
FULL FLIGHT SPIKED MAIN AUGER
VIP2-1080
| Full flight spiked main auger | VIP2-1080 |
UPPER AUGER 14" DIAMETER
| Upper auger 14" | VS2-1080 |
SPEED REDUCER
PRH-30M-2
PRH-25M-2
PR3G200-2
| Speed reducer 1000/555 RPM - 220 HP at 1000 RPM - 3 gears - shafts 7 1/16" c/c | PRH-30M-2 |
Drop box 1000/540 RPM. Two choices of input shafts : Reducer inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or reducer only 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c |
PRH-25M-2 |
| Reducer 1000/555 (200 HP at 1000 RPM) 3 gears - 8" c/c | PR3G200-2 |
CHOICE OF POWER TAKE-OFF (PTO)
| T80 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9225 |
| T80 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9569 |
| T80 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) | 9569-1 |
| V80 multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9225-V |
| V80 multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9569-V |
| T90 PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) | 9475 |
| T90 PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9475-1 |
| T90 PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) | 9475-2 |
V90 multilobe PTO 1 3/8"-6 & 1 3/4"-20 (540 RPM) |
9598 |
| V90 multilobe PTO 1 3/8"-21 & 1 3/4"-20 (1000 RPM) | 9599 |
| V90 multilobe PTO 1 3/4"-20 & 1 3/4"-20 (1000 RPM) | 9604 |
HYDRAULIC MOTOR FOR ROTARY DRUM (TRC MODELS ONLY)
| Hydraulic motor (included on TRC model) | MLH-315-R |
IMPELLER HOUSING
| Impeller housing contour made from Hardox 450 steel in lieu of regular grade steel | TBHD-3415 |
| Impeller housing contour made from Hardox 450 steel in lieu of regular grade steel (for TRC model) | TBHD-3415TRC |
RUBBER DEFLECTOR FLAP
| Rubber deflector flap located from the top of the frame to the auger. Reduces projections. | TL-98108 |
CHOICE OF COLORS
Blue
Orange
INDUSTRIAL Yellow
Green
KIO Orange
Black
| PRONOVOST Red | Included |
| Blue | PG2-02 |
| Orange | PG2-04 |
| INDUSTRIAL yellow | PG2-06 |
| Green | PG2-07 |
| KIO Orange | PG2-09 |
| Black | PG2-10 |
Finding the right snowblower
Complementary informations
HYDRAULIC DRIVEN
It is possible to use this snowblower with hydraulic drive. The hydraulic oil flow at a specific pressure will guide you in to the choice of the snowblower.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
HYDRAULIC WHEELS FOR SNOWBLOWERS
Hydraulic wheels permit using the snowblower at a constant height from the ground without scraping it. Practical to avoid blowing gravel, they permit snowblowing on a grassy surface while avoiding direct contact of the blade with the ground.
*Available only on a new snowblower made in production.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
ICE SCRAPER BLADE FOR SNOWBLOWERS
The ice scraper blade is installed under the snowblower, easily and requires no tool.
Scrape icy surfaces to create a grooved finich that increases grip. Its design requires no additional oil outlet or any modification to the snowblower.
When required, the ice scraper blade must be assembled to the snowblower and then disassembled after use.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
SNOW ROLLER FOR SNOWBLOWERS
Lifts the snowblower by 3 inches.
Allows for compacting a uniform snow base while keeping the snowblower elevated to prevent gravel from entering. Perfect for the start of the season. Compatible with our most popular models.
Click here to watch the presentation video.
Contact your Pronovost dealer to obtain a quote for your specific requirements.
CHUTE HEIGHTS
To view the table of chute height measurements, click on the link below :
Chute heights table
Complete specifications
| HP recommended | 100 - 150 HP PTO |
| Working width | 108" | 2743 mm |
| Cutting height | 48" | 1219 mm |
| Cutting height of lateral blades | Option CL : 56 1/2" | 1435 mm |
| Lateral blades - High quality steel | Option : CL-98104 3/8" x 4" |
| Height - Chute base | 47" | 1194 mm |
| Height of chute base (TRC model) | 49" | 1245 mm |
| Height with telescopic chute | PCT-92104 : 116" | 2946 mm closed, 147" | 3734 mm extended PCTC-INDR : 120" | 3048 mm closed, 152" | 3861 mm extended |
| Height with telescopic chute (TRC model) | PCT-92104 : 118" | 2997 mm closed, 149" | 3785 mm extended PCTC-INDR : 122" | 3099 mm closed, 154" | 3912 mm extended |
| Impeller diameter | 34" | 864 mm |
| Depth of drum | 15" | 381 mm |
| Impeller housing contour : High quality steel | Included |
| Impeller housing contour : Hardox 450 | Option |
| Number of impeller blades | 6 |
| Impeller shaft diameter | 2" | 51 mm |
| Height of impeller center | 21 1/2" | 546 mm |
| Rotor RPM | 540 RPM |
| Required RPM for the tractor PTO | 540 RPM - Opt. 1000 RPM |
| Number of augers | 1 opt. 2 |
| Main auger diameter | 26" | 660 mm |
| Upper auger diameter | Option : 14" | 355 mm |
| Drive chain - Main auger | 100 |
| Hitch category | 2 - 34 1/2" | 876 mm c/c |
| Number of shear bolts | 1 for impeller + 1 for auger |
| Drum rotation for hydraulic motor (TRC only) | Included with MLH-315-R and cushion valve |
| PR3G200-2: Speed reducer 1000/555 (200 ch à 1000 RPM) 3 gears - 8" c/c | Option : PR3G200-2 |
| PRH-25M-2: Drop box 1000/540 RPM. Two choice of input shafts : Speed reducer and inverter 225 HP at 1000 RPM 2/3 gears - shafts 6 3/4" c/c or non-inverter reducer 175 HP at 1000 RPM 3/3 gears - shafts 8" c/c | Option : PRH-25M-2 |
| PRH-30M-2: Speed reducer 1000/555 RPM - 220 HP at1000 RPM - 3 gears - shafts 7 1/16" c/c | Option : PRH-30M-2 |
| Scraper blade - High quality steel | Included : 1/2" x 4" reversible, not sharpened |
| Scraper blade - Semi-industrial made of Hardox 450 | Option : SIT1-108 1/2" x 4" reversible, not sharpened |
| Scraper blade - Industrial made of Hardox 450 | Option : T1-108 1/2" x 6" not reversible, sharpened |
| Scraper blade - Stainless steel | Option : SST-108 1/2" x 4" reversible, not sharpened |
| Adjustable skid shoes - Quick adjustment high quality steel | Included |
| Adjustable skid shoes - Quick adjustment Hardox 450 | Option : PHD-92104 |
| Adjustable skid shoes - Quick adjustment Hardox 600 | Option : PSHD-92104 |
| Adjustable skid shoes - Quick adjustment stainless steel | Option : PST-92104 |
| Full flight main auger (industrial) | Option : VIP2-1080 |
| Chute - Semi-industrial with greasable hinges and removable access panel | Included : PSIG-92104 |
| Chute - 24" extension | Option : PRP-92104-2 |
| Chute - 48" extension | Option : PRP-92104 |
| Chute - Telescopic including extension cylinders | Option : PCT-92104 |
| Chute - Telescopic with rounded deflector including extension and deflector cylinders | Option : PCTC-INDR |
| Chute rotation system - Hydraulic motor kit (motor not included) | Included with MLH-315-R and cushion valve |
| Chute maximum rotation angle - Hydraulic motor | 305° |
| Antifriction for chute | Included : ring |
| Deflector - Hydraulic cylinder option | Included 25TR08 |
| Bearing / ductile iron casting | 1 1/2" | 38 mm |
| PTO | Included : T80 - Options : V80, T90 & V90 |
| Color (including primer) | Included : Pronovost Red Opt. : Choice of 6 colors |
| Storage support | Included |
| Weight including chute | 2530 lbs | 1148 kg 9 |
| Weight including chute (TRC model) | 2850 lbs | 1293 kg 9 |
Design and specifications subject to change without notice.
1 Weight without drive shaft.
2 Weight including chute.
3 Weight without chute.
4 Including chute PSIG-7486, drive shaft and hydraulic motor.
5 Including chute and cylinder.
6 Weight including chute, chute cylinder and rotation hydraulic motor.
7 Weight including telescopic chute.
8 Weight including telescopic chute and reducer.
9 Weight with chute PSIG.
Photos/videos
